Wusthof 8x22 Whetstone Sharpener Fine

Description

The 1000 side of the stone with the coarse grain is suitable for removing small flaws and dents and to prepare the edge for honing. Before each use, immerse the stone in water for 5-10 minutes. Always place the stone on a flat, slip-resistant surface, and use the entire surface of the stone when sharpening. The Wusthof Fine Combination Ceramic Water Stone features a coarse grain on one side with a finer grain on the other. The Wusthof Fine Combination Ceramic Water Stone features a coarse grain on one side with a finer grain on the other. The 1000 side of the stone with the coarse grain is suitable for removing small flaws and dents and to prepare the edge for honing. The 3000 side with the finer grain is used to hone the edge to the desired sharpness. Using gentle pressure, simply pull the edge of the blade in a 20° angle across the stone from the heel of the blade to its tip. Repeat this same procedure on the other side of the edge. Before each use, immerse the stone in water for 5-10 minutes. Always place the stone on a flat, slip-resistant surface, and use the entire surface of the stone when sharpening. This will ensure even wear of the stone over time. The 3000 side with the finer grain is used to hone the edge to the desired sharpness. This will ensure even wear of the stone over time. Using gentle pressure, simply pull the edge of the blade in a 20° angle across the stone from the heel of the blade to its tip. Repeat this same procedure on the other side of the edge.

Key Features

• Using gentle pressure, simply pull the edge of the blade in a 20° angle across the stone from the heel of the blade to its tip.
• The 3000 side with the finer grain is used to hone the edge to the desired sharpness.
• The Wusthof Fine Combination Ceramic Water Stone features a coarse grain on one side with a finer grain on the other.
• Before each use, immerse the stone in water for 5-10 minutes.
• The 1000 side of the stone with the coarse grain is suitable for removing small flaws and dents and to prepare the edge for honing.
• Always place the stone on a flat, slip-resistant surface, and use the entire surface of the stone when sharpening.