Niagara Cutter N85294 Carbide Square Nose End Mill - inch, Uncoated (Bright) Finish, Roughing and Finishing Cut, 30 Degree Helix

Description

If heat is not reduced effectively, the tools cutting edges will dull and additional material buildup can occur. The round shank accommodates a variety of holders. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The 30-degree helix angle supports general-purpose applications. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. Two-flute designs offer the efficient chip removal, but more flutes provide a smoother finish. The Niagara Cutter C230 uncoated (bright) carbide square nose end mill has two flutes and a 30-degree helix angle for general-purpose machining on a range of materials. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. The tools square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.000 to -0.002. The shank is the end of the tool held in place by a tool holder or machine.

Key Features

• End mills are designed to remove material and create multi-dimensional shapes and profiles.
• Two-flute designs offer the efficient chip removal, but more flutes provide a smoother finish.
• The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life.
• The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut.
• They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter.
• The 30-degree helix angle supports general-purpose applications.