Grey Man Tactical 9.25 x 17 Rigid Molle Panel Black GMT-RMP-09

Description

When inserted into any bag, it gives you the tactical ability to organize your mission critical gear on an interchangeable platform that can be swapped out or quickly reorganized as the mission changes. RMP Tactical Backpack Insert - Rigid Panel stays upright in backpack - Attach MOLLE style pouches to organize your gear - Customize with Adhesive Backed Loop to accept Velcro Hook Pouches - Use GMT backer plates to hard mount a variety of accessories. Peel the backing off the adhesive backed velcro tape and place the hook section onto the panel. Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to. For backpacks with Internal Velcro Loop: - Purchase "Low Profile Hook - Adhesive Backed - 3/4" Width" from GMT. Ensure the panel is cleaned with an alcohol wipe and completely dry. You can loop a velcro one wrap, Velcro Cinch Strap, Web Dominator, or Grimloc through the internal MOLLE webbing of the backpack and secure the panel to the pack using one of those methods. Press firmly int. For any backpack without internal MOLLE webbing: Hydration Bladder Loop - Secure the panel at the top of the internal main pocket by using a hydration bladder loop if available. Use a chicago screw to secure the panel to the grommet. This promotes higher adhesion to the panel. Use Velcro one wrap or Grimloc.

Key Features

• Optionally, use 3M Primer 94 to prime the surface before sticking the adhesive backed velcro into place.
• Product Specifications Width: 9.25" (234.95mm) Height: 17" (431.8mm) Thickness: 0.188" (4.77mm) Material: High Strength Polyethylene Weight: 10.75 ounces (304.76 grams) Backpack Compatibility The 9.25in x 17in RMP Backpack Insert fits.
• Grommet / Chicago - Punch a hole in the fabric and secure a grommet to prevent ripping.
• Press firmly into place, and then press further with a rolling pin or place heavy weight onto panel to compress and ensure full contact. - Apply heat from a hair dryer to warm up the panel and the velcro hook tape, enabling the adhesive to.
• Use a chicago screw to secure the panel to the grommet.