General Finishes GF-CP-5 5 Gallon Interior Clear Water Base Poly Flat

Description

Do not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption. Scrub clean with a detergent, such as Spic and Span or Dawn, using a Scotch Brite pad. Let dry completely before applying General Finishes product. Rinse well with water. If you use with products containing phosphates (salt), which can linger in the substrate and produce a white haze, be sure to rinse thoroughly. Dry 1-2 hours. Remove dust with a vacuum, compressed air, an oil-free tack cloth or a water-dampened rag. If you skip this critical step, your finish may fail. Preparation for Raw Wood or Raw Wood Projects That Are to be Stained Sanding Schedule: 120-grit followed by 150- or 220-grit sandpaper. If your project requires a deeper cleaning, see Power Prep Cleaning Highly Used Existing Finishes below. Step 2: How to Apply General Finishes Clear Poly CAUTION: Do NOT use GF Clear Poly or any other clear coat, over white or light paints such as General Finishes Milk Paint, or General Finishes Enduro White Poly as it may cause yellowing. Let dry completely before applying GF product. Step 1: Preparation for Clear Poly All wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding. Do NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust. It does not require a topcoat. Scuff clean with a Scotch Brite pad and a 50:50 mix of denatured alcohol and water.

Key Features

• Preparation for Projects with an Existing Finish (Sealed Surface) For high-use areas with heavy grime build-up and oil from hands, give your project a deeper cleaning.
• Preparation for Raw Wood or Raw Wood Projects That Are to be Stained Sanding Schedule: 120-grit followed by 150- or 220-grit sandpaper.
• Step 1: Preparation for Clear Poly All wood projects require preparation sanding, and all existing finishes require prep cleaning and sanding.
• Do NOT use steel wool with water-based finishes; the particles will get trapped in the finish and rust.
• Do not over-sand with fine-grit sandpapers; this will close and seal the wood grain, preventing ideal color absorption.
• Power Prep Cleaning Highly Used Existing Finishes For high-use areas such as kitchen cabinets or table tops with heavy grime build-up and oil from hands, give your project a "Power" clean.