Conbraco 1061410 VLV - REL, 3/4x22 x 1x22 50 psi, BRZ 1, 418, 000 BTU

Description

Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in which it operates. They also relieve excess vacuum by opening to release a gas into the system and then closing after it reaches its low-pressure limit. The spring is steel for resistance to corrosion, and a fabric-reinforced, molded EPDM (ethylene propylene diene monomer) diaphragm isolates the spring from water at all times. This Apollo Valve 10-600 series hot water relief valve protects against excessive water pressure due to failure of controls to regulate BTU input. The seat is silicone for resistance to high temperatures and is elevated for draining water away from the seat area. The spring is steel for resistance to corrosion, and a fabric-reinforced, molded EPDM (ethylene propylene diene monomer) diaphragm isolates the spring from water at all times. The seat is silicone for resistance to high temperatures and is elevated for draining water away from the seat area. It has a bronze body, a 50 pounds per square inch (psi) relief pressure, and a 3/4" female National Pipe Thread (NPT) inlet connection and 1" female NPT outlet. Some relief valves have an adjustment mechanism to set the pressure where the valve opens, making it suitable for various applications. The valve can be used in operating temperatures up to 250 degrees F.

Key Features

• Relief valves are rated according to the volume of liquid or gas that can flow through them and the material that the valve is constructed from must be suitable for the fluid or gas, which may be corrosive or at an extreme temperature, in.
• It has a bronze body, a 50 pounds per square inch (psi) relief pressure, and a 3/4" female National Pipe Thread (NPT) inlet connection and 1" female NPT outlet.
• The valve openings allow fluids or gases to escape to decrease pressure, and then close once the valve reaches the reseating pressure limit.
• This Apollo Valve 10-600 series hot water relief valve protects against excessive water pressure due to failure of controls to regulate BTU input.
• The spring is steel for resistance to corrosion, and a fabric-reinforced, molded EPDM (ethylene propylene diene monomer) diaphragm isolates the spring from water at all times.
• The seat is silicone for resistance to high temperatures and is elevated for draining water away from the seat area.