Awlgrip G8010Q; Off-White (Lf)-Quart

Description

Brush/Roller: Mix by volume two parts Awlgrip Topcoat Base Component with one part Awlcat #3/H3002 Brushing Converter until one smooth, homogenous mixture is obtained. Reduce 10-33% with T0031. Awlgrip colors may also be applied over recently applied Awlgrip topcoats/showcoats – consult your local Technical Sales Representative for advice. For standard conventional spray application this can be attained by adding up to 25% reducer using the correct spray reducer(s) appropriate for conditions. Then apply the second coat as an almost full wet coat. H3002, 1.3- 4 oz. Brush/Roller application: Apply Awlgrip Topcoat in at least two coats, allowing 16 hours between each coat. Mixing & Reduction Spray: Mix by volume one part Awlgrip Topcoat Base Component with one part Awlcat #2/G3010 Spray Converter to a smooth, homogenous mixture. On large surfaces such as hull sides, transoms, and house sides, first roll the Awlgrip Topcoat and then smooth the roller stipple by lightly tipping the surface with a brush. Brush/Roller applications require at least two coats. Do not apply G3005 over white or pastel colors. For example, if a 25% reduction is used, overall mix is 1:1:½ by volume (8 oz. Overall mix is 2:1:⅓-1 by volume (8 oz. Maintenance It is difficult for dirt grime and grease to adhere to an Awlgrip, Awlcraft 2000 or Awlgrip HS Topcoat. Allow the second coat to "flash off" 30-45 minutes until only slightly tacky before applying a third coat. Overall mix is 2:1:⅓-1 by volume (8 oz.

Key Features

• Allow the second coat to "flash off" 30-45 minutes until only slightly tacky before applying a third coat.
• For example, if a 25% reduction is used, overall mix is 1:1:½ by volume (8 oz.
• Do not apply G3005 directly to bare wood.
• Allow tack coat to "flash off" 15 to 45 minutes.
• Overall mix is 2:1:⅓-1 by volume (8 oz.
• Sanding between coats with 320-400 grit paper will provide a smoother finish.